Uganda National Bureau of Standards (Declaration of Compulsory Standard Specification) (No. 3) Notice

Requirements and test methods for footwear components - Part 4: Non-metallic perforation resistant inserts

processes - Transparent welding curtains, strips and screens for arc welding processes

A.2 Tourism and related services

Quick release system for trapeze harness

safety line - Safety requirements and test methods

and in the water- Part 1: Classification, materials, general requirements and test methods

and in the water- Part 2: Consumer information

on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices

on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices

on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices

on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices

on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices

A.3 Petroleum Management, Health, Safety, Security and Environment

gas industries - Scheme for conformity assessment of manufacturers of special materials

Pipeline transportation systems - Geological hazard risk management for onshore pipeline

gas industries - Production assurance and reliability management (2nd Edition) (This Uganda Standard cancels and replaces the first edition, US ISO 20815:2008, Petroleum, petrochemical and natural gas industries - Production assurance and reliability management, which has been technically revised).

B CHEMICALS AND CONSUMER PRODUCTS

B.l Medical devices

- Specification

use - Part 4: Syringes with re-use prevention feature (2nd Edition) (This Uganda Standard cancels and replaces US ISO 7886-4: 2006 which has been technically revised).

B.2 Petroleum

and related products (class L) - Family T (Turbines) - Specification for lubricating oils for turbines B.3 Chemicals and Environment

B.3.1 Plastics and related products

{This second edition cancels and replaces the first edition US 766:2007, Plastic basins - Specification, which has been technically revised).

plastic containers (2nd Edition) (This second edition cancels and replaces thefirst edition US 786:2008, Plastics - Codes for resin identification on plastic containers, which has been technically revised). 40 US ISO 11469:2016, Plastics - Generic identification and marking of plastics products (2nd Edition) (This second

edition cancels and replaces the first edition US ISO 11469:2001, Plastics - Generic identification and marking ofplastics products, which has been technically revised).

B3.2 Cosmetics 41 US 2151: 2019, Beeswax for cosmetic industry -

C ENGINEERING

C.l Building and construction materials 42 US EAS 73: 2000, Building limes (quicklime and hydrated lime) - Specification (The Uganda Standard cancels and replaces US 156-1:2017, Building limes - Part 1: Specification and US 156-2:2017, Building limes - Part 2: Test methods which have been withdrawn). 43 US 816:2020, Clay roofing tiles and ridges - Specification (2nd Edition) (The Uganda Standard cancels and replaces US 816:2008 which has been technically revised). 44 US 2224:2020, Expanded polystyrene flagstones and semi cylinders - Specifications 45 US 2225:2020, Expanded polystyrene cap vaults and coffers - Specifications 46 US ISO 19595:2017, Natural aggregates for concrete (This Uganda Standard cancels and replaces US 101:2002 Specification for aggregates from natural sources for concrete).

A C.2 Packaging and packaging products 47 US 1890: 2020, Polyethylene film and sheeting - 48 US 1891:2020, Plastic films made from low-density polyethylene and linear low-density polyethylene for general use and packaging applications - Specification 49 US 2239: 2020, Plastic closures - Specification

6 ■

50 US 2240:2020, Metallic crown caps - Specification 51 US 2244: 2020, Non-woven bags - Specification 52 US ISO 12822:2020, Glass packaging - 26 H 126 crown finish - Dimensions

C.3 Metrology 53 US 1984:2019, Geometry sets - Specification

C.4 Transport and Communication 54 US 2080: 2019, Military combat helmets - Specification

C.5 Mechanical Engineering and Metallurgy

C.5.1 Plastic pipes 55 US ISO 1452-1:2009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticised poly(vinyl chloride) (PVC-U) - Part 1: General (This standard cancels and replaces US 264-1:2001/EAS 182-1 Specification for pipes andfittings made of Unplasticized Poly Vinyl Chloride (PVC-U) for water supply - Part 1: General requirements). 56 US ISO 1452-2:2009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (This standard cancels and replaces US 264-2:2001/EAS 182-2 Specification for pipes andfittings made of Unplasticized Poly Vinyl Chloride (PVC-U) for water supply - Part 2 Nominal diameters, wall thicknesses and nominal pressures (metric series)). 57 US ISO 1452-3:2009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings 58 US ISO 1452-4:2009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves

59 US ISO 1452-5:2009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system

supply and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General (This standard cancels and replaces US 482-1:2003, High density polyethylene (PE-HD) pipes - Part I: General quality requirements).

supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes (This standard cancels < and replaces US 482-2:2003 High Density Polyethylene (PE-HD) pipes - Part 2: Dimensions).

supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings

C.5.2 Steel

and corrugated steel sheets - Specification (This standard cancels and replaces US 540:2006 Hot-dip aluminium -zinc plain and corrugated steel sheets- Specification).

stress structural quality

C.5.3 Repair workshops

certificate of competence to persons and firms involved in repair of weighing and measuring instruments

D FOOD AND AGRICULTURE

D.l Edible oilseeds, fats and oils

Specification (2nd Edition) (This second edition cancels and replaces the first edition, US EAS 14:2000, Specification for margarine, which has been technically revised).

(This standard cancels and replaces US 168:2006, Edible oils and fats - Specification, which has been technically revised).

standard cancels and replaces US 617: 2006, Specification for edible palm olein, which has been technically revised).

standard cancels and replaces US 636: 2006, Specification for edible palm stearin, which has been technically revised).

Specification (This standard cancels and replaces US EAS 57-1:2000, Groundnuts (peanuts) - Specification - Part I: Raw groundnuts for table use andfor oil milling and US EAS 57-2:2000, Groundnuts (peanuts) - Specification - Part 2: Roasted groundnuts, which has been technically revised).

D.2 Cereals, pulses and related products

(This second edition cancels and replaces the first edition, US 334:2001, Barley grains - Specification, which has been technically revised).

D3 Fruits, vegetables, spices and related products

D.4 Meat, poultry, eggs and related products

D.5 General

Hon. AMELIA KYAMBADDE, Minister of Trade, Industry and Cooperatives